Setting up knox with Active Directory/ LDAP

by robin · Published June 9, 2016 · Updated February 22, 2017

Source: https://cwiki.apache.org/confluence/display/KNOX/Using+Apache+Knox+with+ActiveDirectory

This article covers using Apache Knox with ActiveDirectory.

Currently Apache Knox comes “out of the box” setup with a demo LDAP server based on ApacheDS. This was a conscious decision made to simplify the initial user experience with Knox. Unfortunately, it can make the transition to popular enterprise identity stores such as ActiveDirectory confusing. This article is intended to remedy some of that confusion.

If you are new to Knox you may want to check out ’Setting up Apache Knox in three easy steps’.

Part 1

Lets go back to basics and build up an example from first principles. To do this we will start with the simplest topology file that will work. We will iteratively transform that topology file until it integrates with ActiveDirectory for both authentication and authorization.

Sample 1

The initial topology file we will start with doesn’t integrate with ActiveDirectory at all. Instead it uses a capability of Shiro to embed users directly within its configuration. This approach is largely taken to “shake out” the process of editing topology files for various purposes. At the same time it minimizes external dependencies to help ensure a successful starting point. Now, create this topology file.

<GATEWAY_HOME>/conf/topologies/sample1.xml
<topology>
  <gateway>

    <provider>
      <role>authentication</role>
      <name>ShiroProvider</name>
      <enabled>true</enabled>
      <param name="users.admin" value="admin-secret"/>
      <param name="urls./**" value="authcBasic"/>
    </provider>

  </gateway>
  <service>
    <role>KNOX</role>
  </service>
</topology>

If you are a seasoned Knox veteran, you may notice the alternative <param name=“” value=“”/> style syntax. Both this and <param><name></name><value></value></param> style are supported. I’ve used the attribute style here for compactness.

Once this topology file is created you will be able to access the Knox Admin API, which is what the KNOX service in the topology file provides. The cURL command shown below retrieves the version information from the Knox server. Notice -u admin:admin-secretin the command below matches <param name="users.admin" value="admin-secret"/> in the topology file above.

curl -u admin:admin-secret -ik 'http://192.168.68.145:8001:8443/gateway/sample1/api/v1/version'

Below is an example response body output from the command above.
Note: The -i causes the return of the full response including status line and headers which aren’t shown below for brevity.

<?xml version="1.0" encoding="UTF-8"?>
<ServerVersion>
   <version>0.7.0-SNAPSHOT</version>
   <hash>9632b697060bfeffa2e03425451a3e9b3980c45e</hash>
</ServerVersion>

As an aside, if you prefer JSON you can request that using the HTTP Accept header via the cURL -H flag.
Don’t forget to scroll right in these code boxes as some of these commands will start to get long.

curl -u admin:admin-secret -H 'Accept: application/json' -ik 'http://192.168.68.145:8001:8443/gateway/sample/api/v1/version'

Below is an example response JSON body for this command.

{
   "ServerVersion" : {
      "version" : "0.7.0-SNAPSHOT",
      "hash" : "9632b697060bfeffa2e03425451a3e9b3980c45e"
   }
}

Sample 2

With authentication working, now add authorization since the real goal is an example with ActiveDirectory including both. The second sample topology file below adds a second user (guest) and an authorization provider. The <param name="knox.acl" value="admin;*;*"/> dictates that only the admin user can access the knox service. Go ahead and create this topology file. Notice the examples use a different name for each topology file so you can always refer back to the previous ones.

<GATEWAY_HOME>/conf/topologies/sample2.xml
<topology>
  <gateway>

    <provider>
      <role>authentication</role>
      <name>ShiroProvider</name>
      <enabled>true</enabled>
      <param name="users.admin" value="admin-secret"/>
      <param name="users.guest" value="guest-secret"/>
      <param name="urls./**" value="authcBasic"/>
    </provider>

    <provider>
      <role>authorization</role>
      <name>AclsAuthz</name>
      <enabled>true</enabled>
      <param name="knox.acl" value="admin;*;*"/>
    </provider>

  </gateway>
  <service>
    <role>KNOX</role>
  </service>
</topology>

Once this is created, test it with the cURL commands below and see that the admin user can access the API but the guest user can’t.

curl -u admin:admin-secret -ik 'http://192.168.68.145:8001:8443/gateway/sample2/api/v1/version'
curl -u guest:guest-secret -ik 'http://192.168.68.145:8001:8443/gateway/sample2/api/v1/version'

The first command will succeed. The second command above will return a HTTP/1.1 403 Forbidden status along with an error response body.

Part 2

These embedded examples are all well and good but this article is supposed to be about ActiveDirectory. This takes us from examples that “just work” to examples that need to be customized for the environment in which they run. Specifically they require some basic network address and and bunch of LDAP information. The table below describes the initial information you will need from your environment and shows what is being used in the samples here. You will need to adjust values these when used in the samples to match your environment.

A word of caution is warranted here. There are as many ways to setup LDAP and ActiveDirectory as there are IT departments. This variability requires flexibility which in turn often causes confusion, especially given poor documentation (guilty). The examples here focus on a single specific pattern that is seen frequently, but your mileage may vary.

Name	Description	Example
Server Host	The hostname where ActiveDirectory is running.	ad.qa.your-domain.com
Server Port	The port on which ActiveDirectory is listening.	389
System Username	The distinguished name for a user with search permissions.	CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com
System Password	The password for the system user. (See: Note1)	********
Search Base	The subset of users to search for authentication. (See: Note2)	CN=Users,DC=hwqe,DC=hortonworks,DC=com
Search Attribute	The attribute containing the username to search for authentication.	sAMAccountName
Search Class	The object class for LDAP entities to search for authentication.	person

Note1: In these samples the password will be embedded with the topology files. This is for simplicity. The password can be stored in a protected credential store as described here.
Note2: This search base should constrain the search as much as possible to limit the amount of data returned by the query.

To start things off on the right foot, lets execute an LDAP bind against ActiveDirectory. For this you will need your values for Server Host, Server Port, System Username and System Password described in the table above. This initial testing will be done using command line tools from OpenLDAP. If you don’t have these command line tools available don’t despair Knox provides some alternatives I’ll show you later.

The command below will help ensure that the values for Server Host, Server Port, System Username and System Password are correct. In this case I’m using my own test account as the system user because it happens to have search privileges.

ldapwhoami -h ad.qa.your-domain.com -p 389 -x -D 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com' -w '********'

This is brief description of each command line parameter used above.

-h: Provide your Server Host
-p: Provide your Server Port
-x: Use simple authentication vs SASL
-D: Provide your System Username
-w: Provide your System Password

For me this command returns the output below.

u:HWQE\kminder

Now lets make sure that the system user can actually search. Note that in this case the system user is searching for itself because -D and -b use the same value. You could change -b to search for other users.

ldapsearch -h ad.qa.your-domain.com -p 389 -x -D 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com' -w '********' -b 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com'

-b: Provide your System Username

This returns all of the LDAP attributes for the system user. Take note of a few key attributes like objectClass, which here is ‘person’, and sAMAccountName, which here is ‘kminder’.

# extended LDIF
#
# LDAPv3
# base <CN=Users,DC=hwqe,DC=hortonworks,DC=com> with scope subtree
# filter: CN=Kevin Minder
# requesting: ALL
#

# Kevin Minder, Users, hwqe.hortonworks.com
dn: CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com
objectClass: top
objectClass: person
objectClass: organizationalPerson
objectClass: user
cn: Kevin Minder
sn: Minder
givenName: Kevin
distinguishedName: CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com
instanceType: 4
whenCreated: 20151117175833.0Z
whenChanged: 20151117175919.0Z
displayName: Kevin Minder
uSNCreated: 26688014
uSNChanged: 26688531
name: Kevin Minder
objectGUID:: Eedvw9dqoUK/ERLNEFrQ5w==
userAccountControl: 66048
badPwdCount: 0
codePage: 0
countryCode: 0
badPasswordTime: 130922583862610479
lastLogoff: 0
lastLogon: 130922584014955481
pwdLastSet: 130922567133848037
primaryGroupID: 513
objectSid:: AQUAAAAAAAUVAAAA7TkHmDQ43l1xd4O/MigBAA==
accountExpires: 9223372036854775807
logonCount: 0
sAMAccountName: kminder
sAMAccountType: 805306368
userPrincipalName: [email protected]
objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=hwqe,DC=hortonworks,DC=com
dSCorePropagationData: 16010101000000.0Z
lastLogonTimestamp: 130922567243691894

# search result
search: 2
result: 0 Success

# numResponses: 2
# numEntries: 1

Next, lets check the values for Search Base, Search Attribute and Search Class with a command like the one below.
Again, don’t forget to scroll right to see the whole command.

ldapsearch -h ad.qa.your-domain.com -p 389 -x -D 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com' -w '********' -b 'CN=Users,DC=hwqe,DC=hortonworks,DC=com' -z 5'(objectClass=person)' sAMAccountName

-z 5: Limit the search results to 5 entries. Note that by default AD will only return a max of 1000 entries.
’(objectClass=person)’: Limit the search results to entries where objectClass=person. This value was taken from the search result above.
sAMAccountName: Return only the SAMAccountName attribute

If no results were returned go back and check the output from the search above for the correct settings. The results for this command should look something like what is shown below. Take note of the various attribute values returned for sAMAccountName. These are the usernames that will ultimately be used for login.

# extended LDIF
#
# LDAPv3
# base <CN=Users,DC=hwqe,DC=hortonworks,DC=com> with scope subtree
# filter: (objectClass=person)
# requesting: sAMAccountName
#

# Administrator, Users, hwqe.hortonworks.com
dn: CN=Administrator,CN=Users,DC=hwqe,DC=hortonworks,DC=com
sAMAccountName: Administrator

# guest, Users, hwqe.hortonworks.com
dn: CN=guest,CN=Users,DC=hwqe,DC=hortonworks,DC=com
sAMAccountName: guest

# cloudbase-init, Users, hwqe.hortonworks.com
dn: CN=cloudbase-init,CN=Users,DC=hwqe,DC=hortonworks,DC=com
sAMAccountName: cloudbase-init

# krbtgt, Users, hwqe.hortonworks.com
dn: CN=krbtgt,CN=Users,DC=hwqe,DC=hortonworks,DC=com
sAMAccountName: krbtgt

# ambari-server, Users, hwqe.hortonworks.com
dn: CN=ambari-server,CN=Users,DC=hwqe,DC=hortonworks,DC=com
sAMAccountName: ambari-server

# search result
search: 2
result: 4 Size limit exceeded

# numResponses: 6
# numEntries: 5

Sample 3

At this point you have verified all of the environmental information required for authentication, you are ready to create your third topology file. Just as with the first example, this topology file will only include authentication. We will tackle authorization later.

The table below highlights the the important settings in the topology file.

Parameter	Description	Example
main.ldapRealm	The class name for Knox’s Shiro Realm implementation.	org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm
main.ldapContextFactory	The class name for Knox’s Shiro LdapContextFactory implementation.	org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory
main.ldapRealm.contextFactory	Sets the context factory on the realm.	$ldapContextFactory
main.ldapRealm.contextFactory.url	Sets the AD URL on the context factory.	ldap://ad.qa.your-domain.com:389
main.ldapRealm.contextFactory.systemUsername	Sets the system users DN on the context factory.	CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com
main.ldapRealm.contextFactory.systemPassword	Sets the system users password on the context factory.	********
main.ldapRealm.searchBase	The subset of users to search for authentication.	CN=Users,DC=hwqe,DC=hortonworks,DC=com
main.ldapRealm.userSearchAttributeName	The attribute who’s value to use for username comparison.	sAMAccountName
main.ldapRealm.userObjectClass	The objectClass to limit the search scope.	person
urls./**	Apply authentication to all URLs.	authcBasic

Create this sample3 topology file. Take care to replace all of the example environment values with the correct values for your environment you discovered and verified above.

<GATEWAY_HOME>/conf/topologies/sample3.xml
<topology>
  <gateway>

    <provider>
      <role>authentication</role>
      <name>ShiroProvider</name>
      <enabled>true</enabled>
      <param name="main.ldapRealm" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm"/>
      <param name="main.ldapContextFactory" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory"/>
      <param name="main.ldapRealm.contextFactory" value="$ldapContextFactory"/>

      <param name="main.ldapRealm.contextFactory.url" value="ldap://ad.qa.your-domain.com:389"/>
      <param name="main.ldapRealm.contextFactory.systemUsername" value="CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
      <param name="main.ldapRealm.contextFactory.systemPassword" value="********"/>

      <param name="main.ldapRealm.searchBase" value="CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
      <param name="main.ldapRealm.userSearchAttributeName" value="sAMAccountName"/>
      <param name="main.ldapRealm.userObjectClass" value="person"/>

      <param name="urls./**" value="authcBasic"/>
    </provider>

  </gateway>
  <service>
    <role>KNOX</role>
  </service>
</topology>

We could go straight to trying to access the Knox Admin API with cURL as we did before. However, lets take this opportunity to explore the new LDAP diagnostic tools introduced in Apache Knox 0.7.0.

This first command helps diagnose basic connectivity and system user issues.

bin/knoxcli.sh system-user-auth-test --cluster sample3
System LDAP Bind successful.

If the command above works you can move on to testing the LDAP search configuration settings of the topology. If you don’t provide the username and password via the command line switches you will be prompted to enter them.

bin/knoxcli.sh user-auth-test --cluster sample3 --u kminder --p '********'
LDAP authentication successful!

Once all of that is working go ahead and try the cURL command.

curl -u kminder:******** -ik 'http://192.168.68.145:8001:8443/gateway/sample3/api/v1/version'

Sample 4

The next step is to enable authorization. To accomplish this there is a bit more environmental information needed. The OpenLDAP command line tools are useful here again to ensure that we have the correct values. Authorization requires determining group membership. We will be using searching to determine group membership. The way ActiveDirectory is setup for this example, this requires knowing four additional pieces of information: groupSearchBase, groupObjectClass, groupIdAttribute and memberAttribute.

The first, ‘groupSearchBase’ is something that you will need to find out from your ActiveDirectory administrator. In my example, this is value ‘OU=groups,DC=hwqe,DC=hortonworks,DC=com’. This value is a distinguished name that constrains the search groups for which a given user might be a member. Once you have this you can ‘ldapsearch’ to see the attributes of some groups to determine the other three settings.

Here is an example of an ‘ldapsearch’ using groupSearchBase from my environment.

ldapsearch -h ad.qa.your-domain.com -p 389 -x -D 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com' -w '********' -b 'OU=groups,DC=hwqe,DC=hortonworks,DC=com' -z 2

This is the output.

# extended LDIF
#
# LDAPv3
# base <OU=groups,DC=hwqe,DC=hortonworks,DC=com> with scope subtree
# filter: (objectclass=*)
# requesting: ALL
#

# groups, hwqe.hortonworks.com
dn: OU=groups,DC=hwqe,DC=hortonworks,DC=com
objectClass: top
objectClass: organizationalUnit
ou: groups
distinguishedName: OU=groups,DC=hwqe,DC=hortonworks,DC=com
instanceType: 4
whenCreated: 20150812202242.0Z
whenChanged: 20150812202242.0Z
uSNCreated: 42340
uSNChanged: 42341
name: groups
objectGUID:: RYIcbNyVWki5HmeANfzAbA==
objectCategory: CN=Organizational-Unit,CN=Schema,CN=Configuration,DC=hwqe,DC=h
 ortonworks,DC=com
dSCorePropagationData: 20150827225949.0Z
dSCorePropagationData: 20150812202242.0Z
dSCorePropagationData: 16010101000001.0Z

# scientist, groups, hwqe.hortonworks.com
dn: CN=scientist,OU=groups,DC=hwqe,DC=hortonworks,DC=com
objectClass: top
objectClass: group
cn: scientist
member: CN=sam repl2,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=bob,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam,CN=Users,DC=hwqe,DC=hortonworks,DC=com
distinguishedName: CN=scientist,OU=groups,DC=hwqe,DC=hortonworks,DC=com
instanceType: 4
whenCreated: 20150812213414.0Z
whenChanged: 20150828231624.0Z
uSNCreated: 42355
uSNChanged: 751045
name: scientist
objectGUID:: iXhbVo7kJUGkiQ+Sjlm0Qw==
objectSid:: AQUAAAAAAAUVAAAA7TkHmDQ43l1xd4O/SgUAAA==
sAMAccountName: scientist
sAMAccountType: 536870912
groupType: -2147483644
objectCategory: CN=Group,CN=Schema,CN=Configuration,DC=hwqe,DC=hortonworks,DC=
 com
dSCorePropagationData: 20150827225949.0Z
dSCorePropagationData: 16010101000001.0Z

# search result
search: 2
result: 4 Size limit exceeded

# numResponses: 3
# numEntries: 2

From the output, take note of:

the relevant objectClass: ‘group’
attribute used to enumerate members: ‘member’
the attributes that most uniquely name the group: ‘cn’ or ‘sAMAccountName’

These are the groupObjectClass and memberAttribute, values respectively. We will use groupObjectClass=group, memberAttribute=member and groupIdAttribute=sAMAccountName.

The command below repeats the search above but returns just the member attribute for up to 5 groups.

ldapsearch -h ad.qa.your-domain.com -p 389 -x -D 'CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com' -w '********' -b 'OU=groups,DC=hwqe,DC=hortonworks,DC=com' -z 5 member

# extended LDIF
#
# LDAPv3
# base <OU=groups,DC=hwqe,DC=hortonworks,DC=com> with scope subtree
# filter: (objectclass=*)
# requesting: member
#

# groups, hwqe.hortonworks.com
dn: OU=groups,DC=hwqe,DC=hortonworks,DC=com

# scientist, groups, hwqe.hortonworks.com
dn: CN=scientist,OU=groups,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl2,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=bob,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam,CN=Users,DC=hwqe,DC=hortonworks,DC=com

# analyst, groups, hwqe.hortonworks.com
dn: CN=analyst,OU=groups,DC=hwqe,DC=hortonworks,DC=com
member: CN=testLdap1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl2,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=bob,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=tom,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam,CN=Users,DC=hwqe,DC=hortonworks,DC=com

# knox_hdp_users, groups, hwqe.hortonworks.com
dn: CN=knox_hdp_users,OU=groups,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl2,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam repl,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam,CN=Users,DC=hwqe,DC=hortonworks,DC=com

# knox_no_users, groups, hwqe.hortonworks.com
dn: CN=knox_no_users,OU=groups,DC=hwqe,DC=hortonworks,DC=com

# test grp, groups, hwqe.hortonworks.com
dn: CN=test grp,OU=groups,DC=hwqe,DC=hortonworks,DC=com
member: CN=testLdap1,CN=Users,DC=hwqe,DC=hortonworks,DC=com
member: CN=sam,CN=Users,DC=hwqe,DC=hortonworks,DC=com

# search result
search: 2
result: 0 Success

# numResponses: 7
# numEntries: 6

Armed with this group information you can now create a topology file that causes the Shiro authentication provider to retrieve group information. Keep in mind that we haven’t made it all the way to authorization yet. This step is just to prove that your can get the group information back from ActiveDirectory. Once we have the group lookup working, we will enable authorization in the next step.

The table below highlights the changes that you will be making in this topology file.

Parameter	Description	Example
main.ldapRealm.userSearchBase	Replaces main.ldapRealm.searchBase	CN=Users,DC=hwqe,DC=hortonworks,DC=com
main.ldapRealm.authorizationEnabled	Enabled the group lookup functionality.	true
main.ldapRealm.groupSearchBase	The subset of groups to search for user membership.	OU=groups,DC=hwqe,DC=hortonworks,DC=com
main.ldapRealm.groupObjectClass	The objectClass to limit the search scope.	group
main.ldapRealm.groupIdAttribute	The attribute used to provide the group name.	sAMAccountName
main.ldapRealm.memberAttribute	The attribute used to provide the group’s members.	member

Create this topology file file now.

<GATEWAY_HOME>/conf/topologies/sample4.xml
<topology>
    <gateway>

        <provider>
            <role>authentication</role>
            <name>ShiroProvider</name>
            <enabled>true</enabled>
            <param name="main.ldapRealm" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm"/>
            <param name="main.ldapContextFactory" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory"/>
            <param name="main.ldapRealm.contextFactory" value="$ldapContextFactory"/>

            <param name="main.ldapRealm.contextFactory.url" value="ldap://ad.qa.your-domain.com:389"/>
            <param name="main.ldapRealm.contextFactory.systemUsername" value="CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.contextFactory.systemPassword" value="********"/>

            <param name="main.ldapRealm.userSearchBase" value="CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.userSearchAttributeName" value="sAMAccountName"/>
            <param name="main.ldapRealm.userObjectClass" value="person"/>

            <param name="main.ldapRealm.authorizationEnabled" value="true"/>
            <param name="main.ldapRealm.groupSearchBase" value="OU=groups,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.groupObjectClass" value="group"/>
            <param name="main.ldapRealm.groupIdAttribute" value="sAMAccountName"/>
            <param name="main.ldapRealm.memberAttribute" value="member"/>

            <param name="urls./**" value="authcBasic"/>
        </provider>

    </gateway>
    <service>
        <role>KNOX</role>
    </service>
</topology>

Once again the Knox tooling can be used to test this configuration. This time the --g flag will be added to retrieve group information.

bin/knoxcli.sh user-auth-test --cluster sample4 --u sam --p '********' --g
LDAP authentication successful!
sam is a member of: analyst
sam is a member of: knox_hdp_users
sam is a member of: test grp
sam is a member of: scientist

Sample 5

The next sample adds in an authorization provider to act upon the groups. This is the same provider that was added back in the second sample. The parameter <param name="knox.acl" value="*;knox_hdp_users;*"/> in this case dictates that only members of group knox_hdp_users can addess the Knox Admin API via the sample5 topology. Create the topology shown below. Don’t forget to tailor it to your environment.

<GATEWAY_HOME>/conf/topologies/sample5.xml
<topolgy>
    <gateway>

        <provider>
            <role>authentication</role>
            <name>ShiroProvider</name>
            <enabled>true</enabled>
            <param name="main.ldapRealm" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm"/>
            <param name="main.ldapContextFactory" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory"/>
            <param name="main.ldapRealm.contextFactory" value="$ldapContextFactory"/>
            <param name="main.ldapRealm.contextFactory.url" value="ldap://ad.qa.your-domain.com:389"/>
            <param name="main.ldapRealm.contextFactory.systemUsername" value="CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.contextFactory.systemPassword" value="********"/>
            <param name="main.ldapRealm.userSearchBase" value="CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.userSearchAttributeName" value="sAMAccountName"/>
            <param name="main.ldapRealm.userObjectClass" value="person"/>
            <param name="main.ldapRealm.authorizationEnabled" value="true"/>
            <param name="main.ldapRealm.groupSearchBase" value="OU=groups,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.groupObjectClass" value="group"/>
            <param name="main.ldapRealm.groupIdAttribute" value="sAMAccountName"/>
            <param name="main.ldapRealm.memberAttribute" value="member"/>
            <param name="urls./**" value="authcBasic"/>
        </provider>

        <provider>
            <role>authorization</role>
            <name>AclsAuthz</name>
            <enabled>true</enabled>
            <param name="knox.acl" value="*;knox_hdp_users;*"/>
        </provider>

    </gateway>
    <service>
        <role>KNOX</role>
    </service>
</topology>

curl -u kminder:'********' -ik 'http://192.168.68.145:8001:8443/gateway/sample5/api/v1/version'
403
curl -u sam:'********' -ik 'http://192.168.68.145:8001:8443/gateway/sample5/api/v1/version'
200

Sample 6

Next lets enable caching because out of the box this important performance enhancement isn’t enabled. The table below hilights the changes that will be made to the authentication provider settings.

Parameter	Description	Example
main.cacheManager	The name of the class implementing the cache.	org.apache.shiro.cache.ehcache.EhCacheManager
main.securityManager.cacheManager	Sets the cache manager on the security manager.	$cacheManager
main.ldapRealm.authenticationCachingEnabled	Enabled the use of caching during authentication.	true

Create the sample6 topology file now.

<topology>
    <gateway>

        <provider>
            <role>authentication</role>
            <name>ShiroProvider</name>
            <enabled>true</enabled>
            <param name="main.ldapRealm" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm"/>
            <param name="main.ldapContextFactory" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory"/>
            <param name="main.ldapRealm.contextFactory" value="$ldapContextFactory"/>
            <param name="main.ldapRealm.contextFactory.url" value="ldap://ad.qa.your-domain.com:389"/>
            <param name="main.ldapRealm.contextFactory.systemUsername" value="CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.contextFactory.systemPassword" value="********"/>
            <param name="main.ldapRealm.userSearchBase" value="CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.userSearchAttributeName" value="sAMAccountName"/>
            <param name="main.ldapRealm.userObjectClass" value="person"/>
            <param name="main.ldapRealm.authorizationEnabled" value="true"/>
            <param name="main.ldapRealm.groupSearchBase" value="OU=groups,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.groupObjectClass" value="group"/>
            <param name="main.ldapRealm.groupIdAttribute" value="sAMAccountName"/>
            <param name="main.ldapRealm.memberAttribute" value="member"/>

            <param name="main.cacheManager" value="org.apache.shiro.cache.ehcache.EhCacheManager"/>
            <param name="main.securityManager.cacheManager" value="$cacheManager"/>
            <param name="main.ldapRealm.authenticationCachingEnabled" value="true"/>

            <param name="urls./**" value="authcBasic"/>
        </provider>

        <provider>
            <role>authorization</role>
            <name>AclsAuthz</name>
            <enabled>true</enabled>
            <param name="knox.acl" value="*;knox_hdp_users;*"/>
        </provider>

    </gateway>
    <service>
        <role>KNOX</role>
    </service>
</topology>

With this topology file you can execute a sequence of cURL commands to demonstrate that the authentication is indeed cached.

curl -u sam:'********' -ik 'http://192.168.68.145:8001:8443/gateway/sample6/api/v1/version'

Now unplug your network cable, turn off Wifi or disconnect from VPN. The intent being to temporarily prevent access to the ActiveDirectory server. The command below will continue to work even though no cookies are used and the ActiveDirectory server cannot be contacted. This is because the invocation above caused the user’s authentication and authorization information to be cached.

curl -u sam:'********' -ik 'http://192.168.68.145:8001:8443/gateway/sample6/api/v1/version'

The command below uses and invalid password and is intended to prove that the previously authenticated credentials are re-verified. It is important to note that Knox does not store the actual password in the cache for this verification but rather a one way hash of the password.

curl -u sam:'invalid-password' -ik 'http://192.168.68.145:8001:8443/gateway/sample6/api/v1/version'

Sample 7

Finally lets put it all together in a real topology file that doesn’t use the Knox Admin API. The important things to observe here are:

the host and ports for the Hadoop services will need to be changed to match your environment
the inclusion of the Hadoop services instead of the Knox Admin API
the inclusion of the identity-assertion provider
the exclusion of the hostmap provider as this is rarely required unless running Hadoop on local VMs with port mapping

Create the final sample7 topology file.

<GATEWAY_HOME>/conf/topologies/sample7.xml
<topology>
    <gateway>

        <provider>
            <role>authentication</role>
            <name>ShiroProvider</name>
            <enabled>true</enabled>
            <param name="main.ldapRealm" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapRealm"/>
            <param name="main.ldapContextFactory" value="org.apache.hadoop.gateway.shirorealm.KnoxLdapContextFactory"/>
            <param name="main.ldapRealm.contextFactory" value="$ldapContextFactory"/>

            <param name="main.ldapRealm.contextFactory.url" value="ldap://ad.qa.your-domain.com:389"/>
            <param name="main.ldapRealm.contextFactory.systemUsername" value="CN=Kevin Minder,CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.contextFactory.systemPassword" value="********"/>

            <param name="main.ldapRealm.userSearchBase" value="CN=Users,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.userSearchAttributeName" value="sAMAccountName"/>
            <param name="main.ldapRealm.userObjectClass" value="person"/>

            <param name="main.ldapRealm.authorizationEnabled" value="true"/>
            <param name="main.ldapRealm.groupSearchBase" value="OU=groups,DC=hwqe,DC=hortonworks,DC=com"/>
            <param name="main.ldapRealm.groupObjectClass" value="group"/>
            <param name="main.ldapRealm.groupIdAttribute" value="sAMAccountName"/>
            <param name="main.ldapRealm.memberAttribute" value="member"/>

            <param name="main.cacheManager" value="org.apache.shiro.cache.ehcache.EhCacheManager"/>
            <param name="main.securityManager.cacheManager" value="$cacheManager"/>
            <param name="main.ldapRealm.authenticationCachingEnabled" value="true"/>

            <param name="urls./**" value="authcBasic"/>
        </provider>

        <provider>
            <role>authorization</role>
            <name>AclsAuthz</name>
            <enabled>true</enabled>
            <param name="knox.acl" value="*;knox_hdp_users;*"/>
        </provider>

        <provider>
            <role>identity-assertion</role>
            <name>Default</name>
            <enabled>true</enabled>
        </provider>

    </gateway>

    <service>
        <role>NAMENODE</role>
        <url>hdfs://your-nn-host.your-domain.com:8020</url>
    </service>

    <service>
        <role>JOBTRACKER</role>
        <url>rpc://your-jt-host.your-domain.com:8050</url>
    </service>

    <service>
        <role>WEBHDFS</role>
        <url>http://your-nn-host.your-domain.com:50070/webhdfs</url>
    </service>

    <service>
        <role>WEBHCAT</role>
        <url>http://your-webhcat-host.your-domain.com:50111/templeton</url>
    </service>

    <service>
        <role>OOZIE</role>
        <url>http://your-oozie-host.your-domain.com:11000/oozie</url>
    </service>

    <service>
        <role>WEBHBASE</role>
        <url>http://your-hbase-host.your-domain.com:60080</url>
    </service>

    <service>
        <role>HIVE</role>
        <url>http://your-hive-host.your-domain.com:10001/cliservice</url>
    </service>

    <service>
        <role>RESOURCEMANAGER</role>
        <url>http://your-rm-host.your-domain.com:8088/ws</url>
    </service>

</topology>

To verify topology files we frequently use the WebHDFS GETHOMEDIRECTORY command.

curl -ku guest:guest-password 'http://192.168.68.145:8001:8443/gateway/sandbox/webhdfs/v1/?op=GETHOMEDIRECTORY'

This should return a response body similar to what is shown below.

{"Path":"/user/guest"}

Hopefully this provides a more targeted and useful example of using Apache Knox with ActiveDirectory than can be provided in theApache Knox User’s Guide. If you have more questions, comments or suggestions please join the Apache Knox community. In particular you might be interested in one of the mailing lists.

Tags: bigdata security hadoop

Setting up knox with Active Directory/ LDAP

You may also like...

Leave a Reply Cancel reply

Archives

Setting up knox with Active Directory/ LDAP

Part 1

Sample 1

Sample 2

Part 2

Sample 3

Sample 4

Sample 5

Sample 6

Sample 7

Related posts:

You may also like...

Hive on Tez Performance Tuning – Determining Reducer Counts

Insightful Hadoop administration commands

How a newline can ruin your Hive

Leave a Reply Cancel reply

Tags

Archives